Reliability based assessment of axial pile bearing capacity: static analysis,SPT and CPT-based methods     

Sara Heidarie Golafzani  Abolfazl Eslami 《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2020,14(3):216-230

ABSTRACT

Since piles are one of the major geotechnical foundation systems, estimation of their axial bearing capacity is of great importance. Employing different design methods, resulting in a wide range of bearing capacity estimations, complicates the selection of an appropriate design scheme and confirms the existence of model error along with the inherent soil variability in bearing capacity prediction. This paper tends to evaluate different predictive methods in Reliability-Based Design (RBD) framework. In this regard, different static analyses, SPT and CPT-based methods are considered to evaluate which approaches collectively and which method individually, have more reliable predictions for compiled data bank. In order to assess reliability indices and resistance factors, two approaches have been considered, i.e. First Order Second Moment method (FOSM) and First Order Reliability Method (FORM). To investigate the reliability indices for different methods in both RBD approaches, various safety factors and loading ratios have been considered. Also, the Load and Resistance Factor Design (LRFD) resistance factors are calibrated for different target reliability indices and loading ratios. Results show that CPT-based methods are more reliable among other methods. Furthermore, the estimated efficiency ratio, i.e. the ratio of resistance factor to resistance bias factor, confirms this agreement.  相似文献   

橡胶砂弹性动力学参数的弯曲-伸缩元试验研究     

姚玉文  刘方成  补国斌  景立平 《岩土力学》2020,41(7):2369-2379

橡胶砂作为一种廉价环保的土工材料，应用前景十分广阔，关于其力学特性的研究具有重要意义。采用弯曲–伸缩元法对橡胶砂进行了剪切波和压缩波联合测试，分别采用离散频率扫描法和初达波法确定了剪切波和压缩波的传播时间，进而得到其弹性动力学参数：初始剪切模量、侧限模量和泊松比，分析了橡胶含量和围压对橡胶砂弹性动力学参数的影响。结果表明：在同样围压下，随着橡胶含量的增加，橡胶砂初始剪切模量和侧限模量逐渐减小，初始泊松比逐渐增大；在同样橡胶含量下，随着围压的增大，橡胶砂初始剪切模量和侧限模量逐渐增大，初始泊松比逐渐减小。最后，在此基础上进行了两种因素耦合效应的分析以及相关力学机制的探讨。  相似文献   

A new numerical approach to the hyperstatic reaction method for segmental tunnel linings     

Ngoc Anh Do  Daniel Dias  Pierpaolo Oreste  Irini Djeran‐Maigre 《国际地质力学数值与分析法杂志》2014,38(15):1617-1632

This paper proposes a numerical approach to the hyperstatic reaction method (HRM) for the analysis of segmental tunnel linings. The influence of segmental joints has been considered directly using a fixity ratio that is determined on the basis of the rotational stiffness. The parameters necessary for the calculation are presented. A specific implementation has been developed using a FEM framework. This code is able to consider the three‐dimensional (3D) effect of segment joints in successive rings on the tunnel lining behaviour. The present HRM allows one to take an arbitrary distribution of segment joints along the tunnel boundary into consideration. In addition, the rotational stiffness of segment joints has been simulated using nonlinear behaviour, as it is closer to the true behaviour of a joint than linear or bilinear behaviour. The numerical results of three hypotheses on ring interaction, which allow the 3D effect of a segmental tunnel lining to be taken into account, have been compared with data obtained from the shield‐driven tunnel of the Bologna–Florence high‐speed railway line project. The numerical results presented in the paper show that the proposed HRM can be used to effectively estimate the behaviour of a segmental tunnel lining. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Torsional dynamic response of a large‐diameter pipe pile in viscoelastic saturated soil     

Changjie Zheng  Hanlong Liu  Xuanming Ding  Yaru Lv 《国际地质力学数值与分析法杂志》2014,38(16):1724-1743

An analytical solution is developed in this paper to investigate the dynamic response of a large‐diameter end‐bearing pipe pile subjected to torsional loading in viscoelastic saturated soil. The wave propagation in saturated soil and pile are simulated by Biot's two‐phased linear theory and one‐dimensional elastic theory, respectively. The dynamic equilibrium equations of the outer soil, inner soil, and pile are established. The solutions for the outer and inner soils in frequency domain are obtained by Laplace transform technique and the separation of variables method. Then, the dynamic response of the pile is obtained on the basis of the perfect contacts between the pile and the outer soil as well as the inner soil. The results in this paper are compared with that of a solid pile in elastic saturated soil to verify the validity of the solution. Furthermore, the solution in this paper is compared with the classic plane strain solution to verify the solution further and check the accuracy of the plane strain solution. Numerical results are presented to analyze the vibration characteristics and illustrate the effect of the soil parameters and the geometry size of the pile on the complex impedance and velocity admittance of the pile head. Finally, the displacement of the soil at different depth and frequency is analyzed. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Settlement analysis of rectangular piles in nonhomogeneous soil using a Winkler model approach     

Hiroyoshi Hirai 《国际地质力学数值与分析法杂志》2014,38(12):1298-1320

An analytical approach using a Winkler model is investigated to provide analytical solutions of settlement of a rectangular pile subjected to vertical loads in nonhomogeneous soils. For a vertically loaded pile with a rectangular cross section, the settlement influence factor of a normal pile in nonhomogeneous soils is derived from Mindlin's solution for elastic continuum analysis. For short piles with rectangular and circular cross sections, the modified forms of settlement influence factors of normal piles are produced taking into account the load transfer parameter proposed by Randolph for short circular piles. The modulus of subgrade reaction along a rectangular pile in nonhomogeneous soils is expressed by using the settlement influence factor related to Mindlin's solution to combine the elastic continuum approach with the subgrade‐reaction approach. The relationship between settlement and vertical load for a rectangular pile in nonhomogeneous soils is available in the form of the recurrence equation. The formulation of settlement of soils surrounding a rectangular pile subjected to vertical loads in nonhomogeneous soils is proposed by taking into account Mindlin's solution and both the equivalent thickness and the equivalent elastic modulus for layers in the equivalent elastic method. The difference of settlement between square and circular piles is insignificant, and the settlement of a rectangular pile decreases as the aspect ratio of the rectangular pile cross section increases. The comparison of results calculated by the present method for a rectangular pile in nonhomogeneous soils has shown good agreement with those obtained from the analytical methods and the finite element method. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Modelling the internal stress field in argillaceous rocks under humidification/desiccation     

L.L. Wang  A. Pouya  M. Bornert  B. Halphen 《国际地质力学数值与分析法杂志》2014,38(16):1664-1682

This paper deals with analytical and numerical modelling of the internal stress generated in argillaceous rocks during humidification/desiccation processes, which is an essential issue for damage study. This local stress field arises from two mechanisms: (i) complex interactions between free swelling/shrinking clay matrix and non‐strained inclusions of carbonate and quartz and (ii) a self‐restraint effect induced by the moisture gradient during the transient moisture exchange process. The inclusion–matrix interaction is investigated in different cases. Firstly, the analytical solution of the stress around a cylindrical inclusion embedded in an infinite swelling matrix is derived: The inclusion would suffer tension (compression) under humidification (desiccation), and the resulting cracking patterns are discussed. Then, the problem of two inclusions with different distances in an infinite swelling matrix is considered, and it is shown that the local stress around an inclusion will be perturbed and amplified by neighbouring inclusions. Finally, an inclusion outcropping at the free surface of a swelling matrix is modelled as to investigate the effect of free surface: The inclusion–matrix interface undergoes shear stresses of which the maximum is found at the free surface. In addition to the inclusion–matrix interaction, the self‐restraint effect is investigated: The induced stress is maximal at the beginning of humidification/desiccation processes and vanishes gradually with time. The quantity of the self‐restraint stress is strongly controlled by the hydric loading rate. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

微波等离子体原子发射光谱法测定偏远矿区海泡石中的主微量元素     

周学忠  谢华林 《岩矿测试》2021,(5):680-687

海泡石是具有层状结构的含水富镁硅酸盐黏土矿物,其中无机元素含量是揭示其成矿物质来源、成矿流体性质和矿床成因的重要依据,通常采用电感耦合等离子体发射光谱/质谱法(ICP-OES/MS)进行测定,等离子体(ICP)的高温激发会产生成大量谱线干扰,维持ICP稳定工作需使用高纯氩气,持续供气对于偏远矿区海泡石的检测还将面对气体采购和运输不便的问题。本文基于微波等离子体原子发射光谱(MP-AES)的低温激发技术减少光谱干扰,建立了准确测定偏远矿区海泡石中主量元素Mg、Al、Ca、Fe、K、Na和微量元素Cu、Zn、Mn、Pb含量的分析方法。利用硝酸-盐酸-氢氟酸混合酸对海泡石进行微波消解,避免了样品处理过程中分析元素的损失,加快了样品处理速度,同时提高了样品溶液的稳定性。通过选择各元素光谱线的分析波长,并利用快速线性干扰校正(FLIC)技术校正光谱干扰,以Lu为内标元素校正基体效应,提高了灵敏度和准确度。各元素的检出限为0.19～14.6μg/L。海泡石国家标准物质(GBW07138)各元素测定值与认定值的相对误差在-5.0%～6.7%之间。本方法具有检出限低、线性范围宽、结果准确等优点;MP-AES采用自带的氮气发生器为等离子体提供氮气作为工作气,无需引入复杂气体,提高了分析效率,尤其适用于气体采购和运输不便的偏远矿区。  相似文献   

铀矿勘查中MT数据提取极化信息可行性研究     

王恒  胡英才  张濡亮 《铀矿地质》2021,(2):269-275

铀矿勘查中大地电磁测深法(以下简称MT法)的应用十分广泛,而频率域电磁勘探中激电效应切实存在。激电参数作为反映岩、矿石电化学性质的参数,在地质解译过程中常常被认为是金属硫化物的局部富集。为了充分利用铀矿床MT数据辅助地质解译,需要从中提取具有多属性特征的激电参数,能否成功提取该参数一直以来备受关注。文章从激电异常识别和二维反演试算两方面来论述成功提取的可行性。结果表明,仪器能够采集到含矿岩体所产生的激电异常,反演试算结果能够还原理论模型的地下空间展布情况。从而论证了从铀矿床MT数据中提取极化率是可行的。  相似文献   

全风化花岗岩地层中高固相离析浆液灌浆机理研究          下载免费PDF全文

赵钰  郑洪  曹函  林飞  王旭斌  贺茉莉 《水文地质工程地质》2021,48(2):78-88

全风化花岗岩地层稳定性差、遇水易发生崩解,工程上使用常规材料防渗加固注浆时效果较差。针对这一情况,依托湖南省郴州市莽山水库防渗加固灌浆项目,通过自主设计的全风化花岗岩地层注浆室内模拟试验装置,进行模拟注浆试验,实现了浆液在整个注浆过程中的扩散情况模拟,对不同注浆压力、不同位置点所取试样开展单轴抗压、抗剪强度及渗透率测试试验,对不同注浆压力下完整结石体取样观察,研究以全风化花岗岩颗粒为配方主体材料的高固相离析浆液在全风化花岗岩地层的防渗加固效果及浆液扩散模式。结果表明:该浆液在全风化花岗岩地层扩散过程中经历了渗透扩散、挤密压缩、劈裂扩展三个阶段,是一种复合注浆形式;以全风化花岗岩颗粒为主体的高固相离析浆液在全风化花岗岩地层注浆中效果显著,随着注浆压力提升,单轴抗压强度显著提升为原土体的3.25～13.67倍,抗剪强度在不同法向压力情况下提升为原土体的1.63～2.69倍,渗透系数从10?4 cm/s下降至10?5 cm/s甚至10?6 cm/s。  相似文献   

深孔纳米复合水泥基护壁堵漏材料研究          下载免费PDF全文

王胜  吴丽钰  蒋贵  张统得  陈礼仪 《探矿工程》2021,48(12):7-13

本文围绕深部钻探技术中护壁堵漏材料性能的实际需要,研制了一种深孔纳米复合水泥基护壁堵漏新材料。首先,通过分析100 ℃条件下2种水泥材料的基本性能,确定了G级油井水泥为胶凝材料;然后,基于深孔钻探护壁堵漏材料的性能缺陷,采用特种纤维、纳米材料针对性改善水泥基浆液的力学性能,并优选早强剂（ZQ）、减水剂（GB）作为外加剂进行正交实验,进而研制出纳米复合水泥基护壁堵漏材料优化配方;最后,对其主要性能进行分析评价。结果表明该材料在深孔钻探中浆液流动性好,力学性能优异,综合性能满足深孔钻探护壁堵漏需求。  相似文献